Change language to
0:00

NVIDIA GeForce drivers 621.14 and 621.24 reportedly keep writing to your SSD at idle, adding tens of gigabytes a day on some systems.

PC support site TroubleGrid traced the writes to a binary log that NVIDIA’s display service rewrites in full each time instead of adding new entries. The bigger the log gets, the more data the service writes each time.

AMD acknowledged a similar SSD-writing bug in its Radeon drivers just days earlier and fixed it in Adrenalin 26.11.1. NVIDIA hasn’t acknowledged the GeForce logging problem, and its 621.24 release notes list no open issues.

Subscribe to our Newsletters for more Tech Stories

How much is the driver writing?

The issue was reported on GeForce Game Ready driver 621.14, released on 4 November 2026, and again on 621.24, released on 12 November. TroubleGrid cites an idle test that recorded 515 MB of writes in five minutes on 621.14, vs under 2 MB on a clean install of 621.01 under identical conditions.

TroubleGrid cites one user’s report of about 30 GB an hour on 621.24, vs 3 GB an hour measured on 621.14. The higher figure comes from a single report using a different method and different hardware.

Wccftech reproduced the behaviour on a Windows 11 PC with an RTX 4090, recording about 1.43 MB/s at idle. Capture Highlights, ShadowPlay, Replay, Desktop Capture, and the NVIDIA App overlay were all disabled. The snapshot doesn’t establish a sustained write rate or actual wear on the SSD’s flash memory.

Windows counts cached writes in its per-process totals, so those numbers can overstate what reaches the SSD. In the test that logged 515 MB for the process, Windows counted 270 MB of total writes to the C: drive over the same five minutes. Check the SSD’s own Data Units Written counter to see how much data the drive actually received.

A consumer 1 TB NVMe drive is typically rated for a few hundred terabytes of writes. At the measured 3 GB an hour, a PC running continuously would log about 26 TB a year, a noticeable fraction of that rating for nothing.

How to check and stop the writes

Open Windows Resource Monitor, select the Disk tab, and look for NVDisplay.Container.exe writing to nvlog.nvlgstg while the PC is idle. The NVIDIA Display Container LS service stores the file at C:\ProgramData\NVIDIA Corporation\nvtopps\nct\nvlog.nvlgstg.

  • Temporarily reduce the writes: Stop NVIDIA Display Container LS, delete the log, and restart the service. A five-minute test on 621.14 measured a 91% cut in the process’s writes, though the log grows back.
  • Roll back the driver: A clean install of 621.01 is the only reported lasting fix. Uninstall the current driver through Settings > Apps, not Device Manager, then install 621.01.
  • Leave the service stopped: Setting NVIDIA Display Container LS to manual and leaving it stopped prevents the writes, but the NVIDIA Control Panel and NVIDIA App won’t open. You’ll lose access to controls for G-SYNC, colour, display scaling, resolution overrides, and per-game 3D settings.

Three users who’d already disabled telemetry still recorded tens of gigabytes of writes.

NVIDIA fixed a similar bug in driver 471.96 in 2021, when the same service kept rewriting nvtopps.db3, setting a precedent for another driver fix.